---

TECHNICAL DATA

EC

Colourless. Tinted according to the Valtti colour card.

undefined

5 - 7 m²/l on old and worn wood surface

7 - 15 m²/l on new surface and wood surface in good condition

0.9 l, 2.7 l, 9 l

White Spirit 1050

Brush or sponge.

Surface dries in several hours. The porosity of the base and the amount of oil used affects the drying time. Apply the second coat as soon as the surface is dry, after few hours depending on the weather conditions.

We recommend to use a tinted product, which provides better weather resistance than a colourless product.
Carry out maintenance when necessary. Surfaces continuously exposed to the weather may need to be treated annually

18 %.

0.8 kg/l, ISO 2811.

Unaffected by cold storage or transportation Once opened, use up the product in the can during the same work project. Product characteristics may vary in half-empty cans.

2570070

---

The surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period.
During treatment and drying, air, surface, and product temperature must be at least +5 º C and relative air humidity less than 80%.

Untreated surfaces:
Remove all dirt, dust and loose material from the surface. Wash off mould with Tikkurila Homeenpoisto (Mould Removal) or Tikkurila Tehopesu (Super Clean) according to instructions.
Surface previously treated with wood oil:
Remove loose material from the surfaces with a scraper or wire brush. Clean and wash if necessary with Homeenpoisto (Mould Removal) or Tehopesu (Super Clean) according to instructions. If a clear film remains on the surface, remove it before treatment.

Stir Valtti Wood Oil thoroughly before and frequently during use. Spread oil with a brush or sponge tightly so that all of the oil is absorbed into the wood evenly. To avoid overlapping, apply continuous strokes the entire length of the board covering the whole surface evenly. Apply one coat on garden furniture. Porous wood might need two coats. When treating jetties take care that the oil does not end up in the water.  Apply the second coat as soon as the oil is absorbed and the surface is dry, after few hours depending on the weather conditions. Oil treatment will make the wood colour darker. Carry out maintenance when necessary. Surfaces continuously exposed to the weather may need to be treated annually.

White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner)

After application, treat the surface carefully for the first week to allow it to achieve the final hardness and durability. After two days, gently clean the surface with a soft brush or mop if necessary.
Clean dirty surfaces with Tikkurila Huoltopesu Maintenance Cleaner (1 part of Maintenance Cleaner to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Maintenance Cleaner (1:1). After washing, rinse the surfaces and allow to dry.

---

Harmful, Xn Contains: Naphtha, hydrotreated heavy (aliphatic hydrocarbon solvent), solvent naphtha, light aromatic and tolylfluanid FLAMMABLE. HARMFUL BY INHALATION. HARMFUL: MAY CAUSE LUNG DAMAGE IF SWALLOWED. HARMFUL TO AQUATIC ORGANISMS, MAY CAUSE LONG-TERM ADVERSE EFFECTS IN THE AQUATIC ENVIRONMENT. Do not breathe solvent vapour. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Do not empty into drains. Keep out of the reach of children. Contains ethyl methyl ketoxime and tolylfluanid. May produce an allergic reaction. A Safety Data Sheet is available at request.
Safety data sheet

---

ENVIRONMENTAL and WASTE DISPOSAL

Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations. NOTE! Cleaning cloths or sanding dust containing the product can create fire by auto-ignitition and should be stored in water before disposal, or be dried outdoors or incinerated immediately.

TRANSPORT

VAK/ADR 3 III

---