Translucent and durable board surfaces
Colours to windows and doors
Valtti Color Extra
Valtti Color Extra forms a lacquer-like surface that is particularly suitable for windows, doors, and boarding.
semi-gloss protection for exterior timber surfaces
Glossy, lacquer-like surface
For a wear-resistant, yet translucent wood finish for exterior board cladding.
Protects from sunlight and moisture
The weather protection of Valtti Color Extra is maximized when tinted with the colours of the Valtti colour card, designed to blend in with the landscape.
(Previous date 01.01.2012)
Valtti Color Extra - Semi-gloss solventborne high build wood stain
Valtti Color Extra is a semi-gloss, high build solventborne translucent wood finish. Extra has excellent application and film forming properties and once dry provides protection from moisture and UV.
For airless spray: use a 0.009” – 0.013” (0.23 – 0.33mm) spray tip.
Thinning: Alkyd Thinner 2010
Clean the surface from dirt, dust and loose material with steel or scrubbing brush. Wash mould off with Tikkurila Mould Removal or Tehopesu Super Clean according to instructions. A priming coat of Valtti Pohjuste priming oil should be applied in as early construction phase as possible. Protect plants from splashes of Valtti Pohjuste.
Previously with a transparent product treated wood surfaces:
Remove all loose material and greyed flaking layers with a scraper and/or steel brush. Clean the surface and wash with Tikkurila Mould Removal or Tehopesu Super Clean, if needed. If a clear, possibly gloss film remains on the surface, remove it or at least sand it thoroughly. Protect plants from splashes of Valtti Color Extra.
For sealing the window pane and window frame interface, use good quality non-setting glazing compounds, which form a protective skin, in accordance with manufacturer’s instructions. Particular attention with regards to preparation should be given to wood such as Oak, Teak, Cedar, Douglas Fir, Mahogany and Idigbo, etc., which contain oil and water-soluble tannin which may impair the drying, hardening or adhesion of surface coatings.
weeks under normal circumstances. If cleansing is needed, use a soft brush, a mop or a
damp cleaning cloth.
according to Regulation (EC) No. 1272/2008
Safety data sheet
Wooden surfaces are exposed to unrelenting weathering from sunshine and humidity. Semi-transparent wood finishes protect wood surfaces against the weather, retarding the adverse effects of moisture and UV-light, without covering up the beautiful wood grain.
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.