Beautiful wall finish
Tikkurila Optiva Matt (5)
Advanced scrub resistant matt for high traffic areas.
High in solids Optiva 5 makes the applicators' life easy. With great application properties and high opacity Optiva 5 leaves a matt finish with deep colour.
Eco friendly paint
Ideal for use on new and previously painted walls and ceilings in new construction, schools, offices, hotels, residential properties. Optiva Matt 5 is ideal for above average traffic areas where a matt finish is required
Optimal and durable final result
Achieves class 1 in ISO 11998 at 10,000 scrubs, a tough washable, scrub resistant matt finish.
Also available in full matt and eggshell the Optiva range has a solution for any surface, style or location.
(Previous date 01.06.2015)
Optiva Matt  - Durable matt
Advanced scrub resistant matt for high traffic areas. High in solids Optiva 5 makes the applicators' life easy. With great application properties and high opacity Optiva 5 leaves a matt finish with deep colour.
Painting of gypsum boards, gypsum, cement-lime plasters, concrete substrates as well as for renovation of old coatings. Product may be used on wood and metal surfaces before application surface should be primed with suitable primer (Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Everal Metal Primer).
Pallet of shades for over 10.000 colours.
Base C: 0.45 l (colour tester), 0.9 l, 2.7 l, 9 l
Brush, roller, spray (nozzle: 415/418, pressure: 150-180 bar).
At temperature +23°C, relative air humidity 50% the paint needs approx. 2 hours to dry. The interval between application of subsequent coats must be at least 4 hours. In lower temperatures and higher humidity the time between the application of next coat might be longer.
New plaster and concrete substrates can be painted after 4 weeks of seasoning. Clean these surfaces from dust and dirt, smooth out irregularities and losses with putty. Gypsum boards, cardboards and putty may be painted after they are fully dry. In case when unevenness of the surface is considerable, the wall should be even with leveling mortar and afterwards apply on the whole surface smooth putty. In case of small unevenness you may apply smooth putty at once. The use of above mentioned mortars and putty should be done according to data sheets of these products. Machine plaster with visible glossy sinter surface should be sanded and clean from dust. Then apply one coat of Tikkurila OPTIVA PRIMER, as finishing coat apply two coats of Tikkurila OPTIVA MATT  paint.
Previously painted surfaces:
Wash the surface before coating and remove grease and dirt and loose and flaking fragments of old coat. Sand glossy surfaces and smooth out irregularities and losses with putty. Paint with gloss grade: satin, semi-matt, semi-gloss and gloss should be sanded on the whole surface before final dusting. For sanding use sanding paper with grain 150 - 200. Prime the whole of substrate with Tikkurila OPTIVA PRIMER. Paint twice with the Tikkurila OPTIVA MATT  paint.
Surfaces painted with glue or lime paint: Remove thoroughly the lime or glue paint. Clean the surfaces from dust and dirt, smooth out irregularities and losses with putty. Then apply one coat of Tikkurila OPTIVA PRIMER, as finishing coat apply twice the Tikkurila OPTIVA MATT  paint. In case of loose substrate prime with impregnate Tikkurila SUPRABILIT.
Notice: It is recommended to check if the used putty is strong and stable surface – if after delicate hand wipe the putty is falling or leave the dust on hand then it means that the surface is loose and it has to be primed with Tikkurila Tikkurila SUPRABILIT impregnant.
Before application thin sufficient amount of paint from one production batch to avoid possible colour difference. Before painting stir the paint thoroughly. Depending on substrate porosity apply 2 coats of Tikkurila OPTIVA MATT  with brush, roller or spray. For colours of particularly weak hiding power (marked within the tinting system) it may be necessary to apply additional coats. In case of applying colours marked in tinting system as weakly hiding (LH) and intensive colours from C base, it is recommended to use priming paint Tikkurila OPTIVA PRIMER tinted to a colour close to the colour of finishing paint. The painting tape should be removed immediately after painting, before the paint will dry. It is recommended to use ANZA painting tools. Notice: Full resistance properties to wet cleaning, according to PN-EN 13300, coating achieves after 28 days from the end of painting.
according to Regulation (EC) No. 1272/2008
OPTIVA MATT 
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.