Glittering surface to the sauna
Protect the wooden floors of your sauna
Silky grey colour
Pearlescent shine for the sauna
Supi Arctic is a finish for humid interior spaces that forms a dirt- and water-repellent surface. It contains an anti-mould agent that protects the treated surface. Suitable for the treatment of wooden surfaces according to instructions. Not suitable for the treatment of sauna benches.
Clean shine for the sauna
Tintable Supi Arctic can give your sauna the silky grey shade of old deadwood or the glistening black of a charred log, straight from nature. You can choose from 10 natural pearly colours in the Arctic colour card.
Repels moisture and water
Supi Arctic forms a dirt- and water-repellent, luxurious and subtly glittering surface for the walls and ceilings in your sauna rooms. Supi sauna products are in the best M1 building material emission class. This means that no harmful substances evaporate from them into the indoor air.
(Previous date 02.09.2011)
Supi Arctic - Sauna Finish
Forms a dirt and water-repellent surface. Containts anti-mould agents, which protect the surface. Suitable for treatment of wood surfaces according to instructions.
Remove dirt and dust. Moisten lightly with water spray, let dry and sand loose wood fiber off. Remove sanding dust.
Old dirty and previously with e.g. Supi Sauna Finish treated wood surfaces:
Wash down with Supi Saunapesu Cleaning Agent according to instructions, rinse thoroughly and let dry. Sand and dust off.
Clean the surface with Supi Saunapesu Cleaning Agent (1-2 dl of cleaning agent into 5 litres of water).
according to Regulation (EC) No. 1272/2008
Safety data sheet
Tikkurila’s waterborne Arctic products let you create a delicately glittering pearlescent sheen for wood. The finished result emphasises the natural beauty of wood and creates the impression of a frosted surface.
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.