Interior walls

Waterbased filler for mineral board joints and especially to adhere seam tape in dry interior premises. Apply by hand with a smoothing trowel or use an automatic taper.

Especially suitable for previously painted surfaces, total or partial filling of gypsum board, wood fibre board, smooth concrete, and plaster surfaces, but also chipboard and wood fibre board. Also ideal for filling gypsum board seams and fastening seam ribbon.

Suitable for rough patching and total filling of small areas when high requirements are set for the layer thickness. Especially ideal for rough concrete and plaster premises. Forms a smooth surface, but if the surface will be painted, finishing with finer filler like Presto LH or LF is recommended.

Especially suitable for filling a grey base such as gypsum board, concrete, light concrete and plaster surfaces, but also chipboard and wood fibre board finishes. Also ideal for filling gypsum board seams.

Suitable for total and partial filling of gypsum board, wood fibre board, concrete and plaster surfaces in humid interior premises. Excellent for fastening joint tape.

Especially suitable for plasterboard joints as well as fastening joint tapes. For partial and total plastering. Also suitable for spray application.

For different substrates, like plasterboard, concrete, lightweight concrete and rendered surfaces. Also suitable for plastering old glass fiber cloth surfaces.

Single pack waterbased stain blocker suitable for use on both new and previously painted concrete, plaster, brick, putty, fibreboard, plasterboard, wood, panel and log surfaces. Akrostop is not suitable for use on iron or steel surfaces. Akrostop will not prevent the seepage of resin.  

Do not mix the product with other products. 

6

8

Acrylic primer for use as part of the Luja hygiene system. Forms a tight moisture resistant primer film and provides a solid base for subsequent finishing coats of Luja 7, 20 or 40. Ideal for use in humid and wet environments.  

For priming and finishing concrete, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Also adheres well to previously painted clean dispersion, alkyd, epoxy and acid catalyzed paint surfaces.

5

10

Versatile acrylic primer for new plaster, dry lining and previously painted surfaces. Ideal for basing out surfaces in new construction, office, retail, leisure, and home projects.

6

8

Single pack solvent based adhesion primer suitable for priming and undercoating both new and previously painted surfaces. Otex adheres well to difficult substrates like glass, tiles, glass fibre, melamine, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and acid-curing paint. Suitable also for wood, wood fibre board, chipboard and metal surfaces in dry interior premises. 

8

10

Single pack waterbased adhesion primer suitable for priming and undercoating both new and previously painted surfaces. Otex Akva adheres well to difficult substrates like glass, tiles, glass fibre, melamine, PVC-plastic, aluminium, zinc coated sheet metal and surfaces coated with alkyd and acid-curing paint. Suitable also for wood, wood fibre board, chipboard and metal surfaces in dry interior premises. Not suitable for maintenance painting of surfaces painted with nitrocellulose lacquer.

6

8

Suitable for interior and exterior lime-rich plaster and previously with lime paint treated surfaces. 

High performance scrub resistant acrylic matt with mould and anti microbial inhibitors.

5

8

High performance scrub resistant acrylic eggshell with mould and anti microbial inhibitors.

Interior painting of concrete, plaster, filler  treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces.

5

8

High performance scrub resistant acrylic semi-gloss with mould and anti microbial inhibitors.

Interior painting of concrete, plaster, filler  treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces.

5

8

Lumi is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces. Not suitable for painting of doors and furniture.

7

12

Concrete, lime, lime cement, cement plaster, sandlime brick  and brick surfaces as well as mineral board surfaces  indoors.  Suitable also for surfaces previously painted with lime, lime cement,  cement and silicate paints.  See instructions.

3

5

Opaque waterbased pearlescent paint suitable for interior furniture, wooden surfaces, fibre board, particle board and metallic surfaces plasterboard (gypsum board) and similar. Taika is available in a range of metallic/ pearlescent colours which can be seen in the Taika colour card.

6

8

Painting of gypsum boards, gypsum, cement-lime plasters, concrete substrates as well as for renovation of old coatings. Product may be used on wood and metal surfaces before application surface should be primed with suitable primer (Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Everal Metal Primer).

16

16

High solids matt emulsion formulated to reduce sparking and flashing whilst providing good covering power.

Painting of gypsum and cardboard boards, cement- lime plasters, concrete surfaces. Tikkurila Optiva Colour may be applied for renovation of previously painted surfaces.

7

12

Advanced scrub resistant matt for high traffic areas. High in solids Optiva 5 makes the applicators' life easy. With great application properties and high opacity Optiva 5 leaves a matt finish with deep colour. 

Painting of gypsum boards, gypsum, cement-lime plasters, concrete substrates as well as for renovation of old coatings. Product may be used on wood and metal surfaces before application surface should be primed with suitable primer (Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Everal Metal Primer).

16

16

Advanced scrub resistant mid sheen emulsion for high traffic areas.

Painting of gypsum boards, gypsum, cement-lime plasters, concrete substrates as well as for renovation of old coatings. Product may be used on wood and metal surfaces before application surface should be primed with suitable primer (Tikkurila Everal Primer, Tikkurila Everal Corrostop, Tikkurila Everal Metal Primer). 

16

16

Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces. Not suitable for painting doors and furniture.

7

12