Traditional glossy floor surface
Suitable also for concrete surfaces
Solvent based single pack floor paint
Betolux is a versatile solvent based single pack floor paint for use on concrete, wood and steel.
New and old surfaces, previously painted epoxy and alkyd substrates, floors in light industrial environments/ factories, walkways ramps and steps, residential garages.
Can be applied to a wide range of new and previously painted surfaces in light industrial environments.
You can find attractive, traditional colours for Betolux in Tikkurila’s Floor Paint colour card, which contains 20 colours for the creation of a personalized colour scheme.
For a variety of applications
Betolux can be used for the easy treatment of wooden or concrete floors and stairs.
(Previous date 04.10.2012)
Betolux - Floor Paint
Versatile single pack solvent based floor paint for interior concrete and wooden floors. Also suitable for repainting epoxy floors or floors previously painted with alkyd paints
Brush, roller or spray.
Dust dry after approx. 3-4 hrs. Recoatable after approx. 1 day. Dry to use after approx. 1 week. Dries completely and reaches final durability in approx. 1 month.
Concrete floors: Remove cement glue coat with a grinding machine. Remove grinding dust.
Wooden floors: Remove all dirt, oil, dust and grease.
Previously painted surfaces:
Wash down previously painted surfaces with Maalipesu (Cleaning Agent), rinse thoroughly with water and allow to dry. Remove old, flaking paint. Sand the surfaces carefully and remove sanding dust.
Surfaces painted previously with Betolux Floor paint can be repainted with Betolux or Betolux Akva Floor paint. See Pretreatment: Previously painted surfaces.
Betolux contains VOC max 500 g/l
according to Regulation (EC) No. 1272/2008
Safety data sheet
InstructionsConsumption varies depending on the surface to be treated and its condition. Absorption is affected e.g. by the surface roughness, moisture content level of timber and porosity. For example, log surface that has been untreated for a long time takes a lot more wood finish than a new surface to be treated.
When calculating the consumption, note that the consumption for round logs is 1.5 times higher than normal. Please also note the corner joints in the surface area.