Waterborne acrylate sealing paint. Prevents bleeding caused by nicotine, soot, liquid drawing ink and hides dried moisture damaged spots.
Single pack waterbased stain blocker suitable
for use on both new and previously painted concrete, plaster, brick, putty,
fibreboard, plasterboard, wood, panel and log surfaces. Akrostop is not
suitable for use on iron or steel surfaces. Akrostop will not prevent the
seepage of resin.
Do not mix the product with other products.
Interior walls and ceilings
6-8 m2/l depending on the substrate.
Brush, roller or spray gun.
- nozzle 0.015" 0.019"
- thinning 0-10 vol %
Drying time at 23°C and 50% relative air humidity
Dust dry after 1 hour, recoatable after 6 hours.
Resists cleaning detergents and weak solvents e.g White Spirit
85ºC, ISO 4211-3.
Wet scrub resistance
SFS-EN 13300 class II, ISO 11998
Approx. 41 %
Approx. 1.3 kg/l, ISO 2811
Protect from frost.
During painting and drying, the temperature of the air, surface and paint should be over +5 ºC, and the relative humidity of the air below 80 %.
Remove dirt and dust from surfaces. Wash the surface with Maalipesu Cleaning Agent according to instructions. Fill holes and cracks with a suitable Presto or Prestonit filler, and sand the dry surface. Remove sanding dust.
Stir Akrostop well before use. Apply 1 to 2 coats by brush, roller or spray gun. Finish with a suitable finishing paint.
Cleaning of tools
Clean tools with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint from tools.
Earliest 1 month after treatment:
Clean the surfaces with a damp sponge or cloth and with a neutral (pH 6-8) detergent. Thinning instructions of the manufacturer must be followed when mixing the solution.
The surface must not be left wet after cleaning.
After treatment surfaces must be handled with care for a few weeks, because the paint will achieve its final hardness and durability under normal conditions after 1 month.
If surfaces must be cleaned soon after finishing, clean the surface lightly with a damp cloth.
EU VOC 2004/42/EC-limit value
(cat A/g) 30g/l (2010).
Akrostop contains VOC max. 30g/l.
HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008
The product is not classified as dangerous.
Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Wear protective gloves.
A Material Safety Data Sheet is available on request.
Safety data sheet
ENVIRONMENTAL and WASTE DISPOSAL
Empty cans should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations.
VAK/ADR not classified
sre150415 / mli231006 / joa020209 / lko141106 / tho141106 / 006 5663